How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask The Famous Forry Your Own Question
The Famous Forry
The Famous Forry, Home Appliance Technician
Category: Appliance
Satisfied Customers: 616
Experience:  I have my own business repairing Washing Machines etc etc.
Type Your Appliance Question Here...
The Famous Forry is online now
A new question is answered every 9 seconds

Its been 1 week since I email this question to you and still

Customer Question

It's been 1 week since I email this question to you and still didn't get a reply.

The dishwasher programme keeps going, it doesn't stop. It seems that it won't heat the water either. Can you help us please?

Luminita Cinca
Submitted: 6 years ago.
Category: Appliance
Expert:  The Famous Forry replied 6 years ago.

Hi to you from David. Is your dishwasher heating the water when on a wash cycle? Often this is the cause of the programmer stopping and not completing the cycle. Element needs to be tested for continuity using multi-meter. Sometimes if you are able to see your element in the base of your appliance by opening the door to the wash cabinet, damage can be spotted without the need to use a multi-meter. Often the element will be badly distorted and or the outer skin will be ruptured, regards David. (The Famous Forry)


Customer: replied 6 years ago.

Thank you for your answer.

The dishwasher is not heating the water at all.

Can you please tell us the code of the element?

Where can the element be found in this type of dishwasher? BOSCH DISHWASHER SGV43A03GB, 230V

Customer: replied 6 years ago.



The element who heat the water is good.

What else can be broken?

Expert:  The Famous Forry replied 6 years ago.
Possibly burnt /broken/snapped wires in door loom. Please check regards David. 'The Famous Forry'
Customer: replied 6 years ago.


What code?


Can be also Bosch SGV43A03GB/17 Sensor-NTC?

We can test this spare somewhere?


The water is not hot and the programme did not stop.



Expert:  The Famous Forry replied 6 years ago.
Have you checked the loom for broken/damaged wires?
Customer: replied 6 years ago.
Everythink ok with the loom/wires.