How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 79509
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

my maytag bravo washer has an error code f what does this mean

Resolved Question:

my maytag bravo washer has an error code f what does this mean it wont spin nor agitate model number MTW6600TQ
Submitted: 6 years ago.
Category: Appliance
Expert:  Tyler Z. replied 6 years ago.
Hello, and thank you for using this service. I'll be helping you with your problem today.

Is the error your getting just and "F" or is there a number after it?
Customer: replied 6 years ago.
it is just an f
Expert:  Tyler Z. replied 6 years ago.
ok then that means you have an internal short in the display control board. You'll need to order and replace the relay control board in order to correct the issue. This control board is located on the far right corner under the control panel. Below is a link to the control board you'll need to order and replace.


You can sometimes unplug the unit and the error will reset, but even if it goes away it will come back sooner than later.
Tyler Z. and 2 other Appliance Specialists are ready to help you