How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Maytag Legacy Series 300 Series..fills with water starts running,

Resolved Question:

Maytag Legacy Series 300 Series..fills with water starts running, but doesnt seem to be spinning the water around from the bottom arm. Won't rinse all of the soap out of the dispenser or off of the silverware. Seems a bit louder than normal as well.
Submitted: 6 years ago.
Category: Appliance
Expert:  Bryan replied 6 years ago.

Hi,Welcome to Just Answer, My name isXXXXX will be helping you with your appliance issue today.


how much water is in the bottom after this fills? in inches.

Customer: replied 6 years ago.
about one inch at the deepest point
Expert:  Bryan replied 6 years ago.
your not getting enough water, do this test, pour about enough water in by hand until its just above the heater and start it see if it sounds normal.
Customer: replied 6 years ago.
Ok..that is definitely better, but why is it not getting enough water???
Expert:  Bryan replied 6 years ago.

you need to replace the fill valve. can you get me the full model # XXXXX the tag inside the machine on the side wall?

Customer: replied 6 years ago.
Expert:  Bryan replied 6 years ago.
this is the valve, its located in the front behind the bottom access panel. you can order this @ Hope Ive been helpful, thanks Bryan
Bryan and other Appliance Specialists are ready to help you