How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 79521
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

My washer is not level - the back is an inch higher then the

Resolved Question:

My washer is not level - the back is an inch higher then the front.
Submitted: 6 years ago.
Category: Appliance
Expert:  Tyler Z. replied 6 years ago.
Hello, and thank you for using this service. I'll be helping you with your problem today.

I'm assuming you've tried to raise the front two legs? Because they are adjustable
Customer: replied 6 years ago.

I have not because the back is 1 inch higher than the dryer. This has changed recently - priviously it was level front to back and with the dryer.



Expert:  Tyler Z. replied 6 years ago.
ok well the back legs adjust as well. You need to tip the machine forward and screw the feet in. There are nuts above the feet that you may need to loosen to turn the feet to adjust them. These nuts are locking nuts and once the feet are screwed into the correct position, you need to tighten the nuts up to the base of the washer so that the feet do not move over time.
Tyler Z. and 2 other Appliance Specialists are ready to help you