How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bob L Your Appl Pal Your Own Question
Bob L Your  Appl Pal
Bob L Your Appl Pal, Home Appliance Tech
Category: Appliance
Satisfied Customers: 7548
Experience:  23 Years Major Appliance Repair
Type Your Appliance Question Here...
Bob L Your Appl Pal is online now
A new question is answered every 9 seconds

What is the procedure to remove the front panel of an electrolux

Customer Question

What is the procedure to remove the front panel of an electrolux gas dryer so I can convert to L.P. from Nat gas, Can't get the front of the dryer the top and control panel are off but the front panel has some hidden clips it appears
Submitted: 7 years ago.
Category: Appliance
Expert:  Bob L Your Appl Pal replied 7 years ago.
If you are experiencing delays.Please check that any open or past Accept files have been processed.This will secure a more rapid answer response..............No need to remove the front panel...You should be able to access the parts by removing the back cover..
Customer: replied 7 years ago.
<p>It says in the conversion paper work to remove the top of the dryer, then the control panel and then the front panel nothing about the back panel. It appears the back panel is not where the gas assembly is located.</p><p> </p><p> </p><p> </p>