How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MRANSWER Your Own Question
MRANSWER
MRANSWER, Home Appliance Technician
Category: Appliance
Satisfied Customers: 6160
Experience:  30 YRS EXP. FACTORY TRAINED AND AUTHORIZED ON ALL MAJOR BRANDS
13971964
Type Your Appliance Question Here...
MRANSWER is online now
A new question is answered every 9 seconds

My Frigidaire range will not enter the clean cycle. I have

Resolved Question:

My Frigidaire range will not enter the clean cycle. I have followed the instructions in the book, when I press the clean control the time display goes blank and then in a few seconds it returns the time of day and nothing happens from there.
Submitted: 6 years ago.
Category: Appliance
Expert:  MRANSWER replied 6 years ago.
After you press clean you must set how long it is to clean. I do not think you are so that is why control defaults back to normal.
Customer: replied 6 years ago.
The manual says nothing about setting the time, it just says to press clean for a three hour cycle, I did as you said and it works. Thanks
Expert:  MRANSWER replied 6 years ago.

Thanks.

 

Acceptance is appreciated since this did answer the issue.

MRANSWER and other Appliance Specialists are ready to help you