How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

We have a GE JCT910 built-in oven. After doing the self cleaning

This answer was rated:

We have a GE JCT910 built-in oven. After doing the self cleaning mode, over 12 hours ago, the door is still locked and the display does not work (it is black). I verified that no breaker has been tripped in the electrical panel. Any suggestions?

your electronic control has failed,

Electronic clock control kit
*Wiring could differ from original, will possibly need to be installed by an appliance repair person.
Appliance Part Mouse OverAppliance Part Mouse Over
Mouse over to see other views. Everything you see is included in this part.
Part 875261
this comes with a new lock assembly but is very difficult to replace the wiring is different, you should call for service and have this replaced, the part is $199.00 @ so at least you know how much the control is, (so you don't get taken) I strongly suggest having this done by a tech though, thanks Bryan

Bryan and 2 other Appliance Specialists are ready to help you