How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 80272
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

Why wont my cold water work on my Maytag Neptune washer

This answer was rated:

Why won't my cold water work on my Maytag Neptune washer?
hot water still comes in correct? And you replace the water solenoid on the back of the washer that your fill hoses connect to?
Customer: replied 6 years ago.
Customer: replied 6 years ago.



ok then unfortunately you have a bad machine control board. This is the control board located right behind your timer. You'll need to order and replace it if you're certain cold water is getting to the washer.
Tyler Z. and other Appliance Specialists are ready to help you