How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 81900
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

My Kenmore Elite suddenly had lights turn on for cycle, cycle

Resolved Question:

My Kenmore Elite suddenly had lights turn on for cycle, cycle temp, time and check lint screen. Lint screen is clean. I cannot clear these lights. I tried running it through a short cycle but it beeps constantly and there is a slight odor as though something is overheating.
Submitted: 7 years ago.
Category: Appliance
Expert:  Tyler Z. replied 7 years ago.
unfortunately that's just a shorted control board. If unplugging and plugging the unit back in didn't seem to reset the problem, you'll need to replace the interface control board in order to correct the issue. Below is a link to the part that will need to be ordered and replaced.


Tyler Z. and other Appliance Specialists are ready to help you