How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eduardo Your Own Question
Eduardo, Home Appliance Technician
Category: Appliance
Satisfied Customers: 128
Experience:  18 years of experience, I'm an appliance and vacuum expert.
Type Your Appliance Question Here...
Eduardo is online now
A new question is answered every 9 seconds

wd8u13f is not filling and after start button is pressed temp

Customer Question

lg wd8u13f front loader is not filling and after start button is pressed temp lights flash after 10 seconds
Submitted: 7 years ago.
Category: Appliance
Expert:  Eduardo replied 7 years ago.

Hello Friend

Here is how you put your unit into a diag mode. You will need to have the unit off. at the same time select soil cycle and second button. then press power. It should beep twice and let you advance the washer to different cycles by pressing start/pause. It sounds to me that you have a faulty board. This will confirm it. If the unit doesn't go into test mode then you have a faulty board.


Good luck

Customer: replied 7 years ago.
<p>thanks, XXXXX XXXXX must have the wrong model in mind,the wd8u13f has not got a soil cycle it has a power button and a play/pause button and a cycle dial with one push button in the centre that changes wash type but not soil.</p><p>when i press the play button to start themachine waits a few seconds then all the temp and option lights flash. does this help. thanks Rob</p>
Expert:  Eduardo replied 7 years ago.
Try the spin speed and soil cycle and then power. You will have the lights all light up. this would be test mode. At that point you select the start/pause to advance the unit to do different things.