How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

model number is 110.47511701/whirlpool built front load can

Resolved Question:

model number is XXXXX built front load
can not get into diagnose mode,follow tech sheet,push 2nd rinse 4 times,not working,do i need a mother controll board
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.

if this wont go into diagnostic mode the control is bad, you can order this @ http://www.repairclinic.com/Appliance-Parts?s=t-8574969-%3d%3d for $139.00, click this link for all the diagrams,

http://www.searspartsdirect.com/partsdirect/getModel!retrieve.pd?modelNumber=110.47511701&pathTaken=partSearch to help you get to the control, thanks Bryan

Bryan and other Appliance Specialists are ready to help you