How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Hello, I have a kitchenaid dishwasher that has the normal button

Resolved Question:

Hello, I have a kitchenaid dishwasher that has the normal button and cancel button blinking and it wont start. is there a way to reset it??
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.

If you did not include a model # XXXXX your question please do on you second reply if possible,this helps us serve you faster.

try here for the model # Appliance Model Illustration

Customer: replied 7 years ago.

I believe this may be it


Expert:  Bryan replied 7 years ago.
thats not comming up , can you look again?
Customer: replied 7 years ago.



Type # XXXXX

Expert:  Bryan replied 7 years ago.
you cant just reset this, its a problem with the control board, Part(NNN) NNN-NNNN width=this will need to be replaced, you can order this @ its located in the door, you will need to take the screws out all the way around the door and lift the inner panel up to access this. hope this helps, thanks Bryan
Bryan and other Appliance Specialists are ready to help you