How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

New homeowner with a GE front loading washer model WCVH6260.

Resolved Question:

New homeowner with a GE front loading washer model WCVH6260. It's stuck in the rinse cycle with the Stop/Pause light flashing, the water is still soapy, and it won't spin. Any suggestions? The washer was probably new in 2006.
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.

you will need to clean the drain pump catch. Part(NNN) NNN-NNNN width=remove the screws holding the panel under the door and unscrews the drain catch and clean it out, be careful there will be water in this, its best to tip this back against the wall as much as possible to keep as much water in the tub as possible. get towels ready also, hope this helps, thanks Bryan

Bryan and 2 other Appliance Specialists are ready to help you