How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 26795
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

i have a kenmore 67732791 turns on but no heat how do i check

Customer Question

i have a kenmore 67732791 turns on but no heat how do i check the igniter
well where is the igniter i unhooked the gas line i cant find where the igniter is at. I have checked the relay switch, the outlet plug. Please help
Submitted: 8 years ago.
Category: Appliance
Expert:  Bryan replied 8 years ago.

If you did not include a model # XXXXX your question please do on you second reply if possible,this helps us serve you faster.

 

can you tell me the first # XXXXX the beginning of the model#, Like 110 , 106 . 556. there should be a 3 number prefix

Customer: replied 8 years ago.
it says the model number is XXXXX an the serial number is XXXXX
Expert:  Bryan replied 8 years ago.
ok this is comming up an electric dryer is it? or is this gas?
Customer: replied 8 years ago.
its gas ok it says 180 00
Expert:  Bryan replied 8 years ago.
I'm still not comming up with this model but the igniter is shown in this picture, Gas Dryer Gutsyou will need to unplug the igniter and check it for continuity, it looks like this, Part 3415hope this helps, thanks Bryan
Customer: replied 8 years ago.
no it is not it
Expert:  Bryan replied 8 years ago.
well I'm sorry your model isn't comming up, is this an American model or U.K.?
Customer: replied 8 years ago.

american model ok well thsnk you bye

 

Expert:  Bryan replied 8 years ago.
your welcome.
Expert:  John replied 8 years ago.

Remove the back panel and look on the air duct for this thermal fuse , unplug the dryer and join and tape the wires, now try the dryer if you get heat replace the thermal fuse.