How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

kitchenaid dishwasher wont run Control lock light is on and

Customer Question

kitchenaid dishwasher won't run Control lock light is on and nothing i do seem to release it.
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.

Press and hold the Air Dry key for 5

seconds to turn off (or on) the Control

Lock feature

 

try this and let me know if it unlocks, thanks Bryan

Customer: replied 7 years ago.
I don't have an air dry feature but under the sani dry button there is a picture of a little lock so I held that button down for 5 seconds but no luck.
Expert:  Bryan replied 7 years ago.
can you recheck the model #, ? something isn't right in it, let me know . thanks Bryan
Customer: replied 7 years ago.
I rechecked # XXXXX it is what i show: KUDSO1FLSS6
Expert:  Bryan replied 7 years ago.
I'm sorry but that number isn't comming up in the data base, what does come up is, KUDS01FLSS0 and your sure its not that correct?
Customer: replied 7 years ago.
The last digit sure looks like a 6 to me.
Expert:  Bryan replied 7 years ago.
ok well I went to my whirlpool service tech sheets(whirlpool make kitchen aid) and no # XXXXX a 6, and your s doesn't have an air dry so I'm at a loss, sorry, I believe since you have a little lock on the control then thats what you need to push and hold, if it doesn't unlock the control board is bad, thats all I have on this one, thanks Bryan
Customer: replied 7 years ago.
Thanks for trying. D
Expert:  Bryan replied 7 years ago.
no problem, sorry, thanks Bryan