How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

i had to replace my time on my hotpoint washing machine and

This answer was rated:

i had to replace my time on my hotpoint washing machine and im having trouble getting the wash cycle lined up

how do you mean lined up, the off position isn't right?



Customer: replied 7 years ago.
i cannot find the off postion because there is no locking postion for the indicartor hash mark or on the know
ok so this part of the knob assembly is worn off? Part 949477
Customer: replied 7 years ago.
is there suppose to be a stop on the back of that that goes into the slot on the time. if so i think it might have broke
yes this goes over the shaft and will only go one way unless its broke. the knob is very inexpensive, around $4.50 @ I would replace the knob. thanks Bryan
Bryan and other Appliance Specialists are ready to help you