How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Profile washer, Model WSSR3120, doesnt fill with water and

This answer was rated:

Profile washer, Model WSSR3120, doesn't fill with water and does not spin. Water supply is working. The washer does go into the agitator cycle. Does this mean the washer inlet valve and /or the water level switch need to be replaced? Does this mean transmision or clutch is malefunctioning?

If you did not include a model # XXXXX your question please do on you second reply if possible,this helps us serve you faster.


if this agitates without any water it most likely the water level control, Part 771434this would also cause it not to spin because the machine thinks theres water in it, until the water is out of the tub it wont spin, this is located in the control panel, pull the little rubber hose off of it and the try spin see if it spins, if so replace it, thanks Bryan

Bryan and other Appliance Specialists are ready to help you