How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 79502
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

I have a Magic Chef 68HA-6TVW that started having F2 fault

Customer Question

I have a Magic Chef 68HA-6TVW that started having F2 fault codes. I replaced the Oven Sensor even though it tested OK. The oven works fine, but on cool down the fan cycles on and off a lot and then finally throws an F2. Any ideas?
Submitted: 7 years ago.
Category: Appliance
Expert:  Tyler Z. replied 7 years ago.
this is a faulty display control or a bad connection between the display control and the oven sensor since the sensor is new. Check continuity through the wire between the control and the sensor and if it checks good, you'll need to replace the display control board to correct the issue.