How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bob L Your Appl Pal Your Own Question
Bob L Your  Appl Pal
Bob L Your Appl Pal, Home Appliance Tech
Category: Appliance
Satisfied Customers: 7548
Experience:  23 Years Major Appliance Repair
14958677
Type Your Appliance Question Here...
Bob L Your Appl Pal is online now
A new question is answered every 9 seconds

washing mashine had lid display and would not finish spin cycle

Resolved Question:

washing mashine had lid display and would not finish spin cycle had lid lock replaced by local repairman now same problem is back
Submitted: 7 years ago.
Category: Appliance
Expert:  Bob L Your Appl Pal replied 7 years ago.
Could mean only one of two things...Your repair has malfunctioned...Recheck the switch with a meter...If ok then your control board is faulty..
Bob L Your Appl Pal and 2 other Appliance Specialists are ready to help you