How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a whirlpool washer that is 5 years old (model #LSQ9549PW2).

Resolved Question:

I have a whirlpool washer that is 5 years old (model #LSQ9549PW2). I started a load of laundry, the tub filled with water, then nothing. There is power to the washer. The washer is level and the lid is closed. I checked to make sure all controls are properly set and still nothing. Any ideas?
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.

If you did not include a model # XXXXX your question please do on you second reply if possible,this helps us serve you faster.

 

the lid switch is bad, Part(NNN) NNN-NNNN width= you can order this @ http://www.repairclinic.com/SSPartDetail.aspx?s=t-LSQ9549PW2-%3d%3dei1018522&PartID=1018522 thanks Bryan

Bryan and 3 other Appliance Specialists are ready to help you
Customer: replied 7 years ago.
How do I install this switch?
Expert:  Bryan replied 7 years ago.
heres a video on how to remove the cabinet, http://www.youtube.com/watch?v=6XIsK3W_Qcg&feature=related it will be on the left side of the top of the cabinet, very easy to replace once you have the control panel tilted back, thanks Bryan