How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 26795
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

how do you stop an F3 alarm on a double oven

This answer was rated:

how do you stop an F3 alarm on a double oven?

Thanks for the question.

try unplugging for 15 min see if that gets rid of the F 3.let me know.

Customer: replied 7 years ago.
The F3 beeping did indeed stop after being unplugged. Thank you for your help!Smile Do I need to have a repair man check it out to insure no problems exist?
No you dont have to do that now antway , if it happens again its the oven sensorthats causing that f 3 .
JENN AIR
Range/Stove/Oven Fault Codes
Failure
Code Condition Check/Repair
F1 Defective touch pad or membrane Replace touch pad or membrane (this problem is usually the touch pad)
F1 Watchdog on board Replace touch pad or clock assembly (also called the ERC)
F2 Oven too hot Replace relay board (if present) or oven temperature sensor
F3 or F4 Open or shorted oven temperature sensor Replace oven temperature sensor
F5 Hardware and watchdog circuits disagree Replace clock assembly (also called the ERC)
F6 Missing AC signal Check for proper voltage
F7 Function key shorted or stuck button Replace touch pad or clock assembly (also called the ERC) or attempt to un-stick button
F8 Analog/Digital supervisory Replace clock assembly (also called the ERC)
F9 Door latch supervisory Check door lock circuit or replace clock assembly (also called the ERC)
F0 Function key stuck Replace touch pad or clock assembly (also called the ERC)


John and 2 other Appliance Specialists are ready to help you