How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 10412
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

My Kenmore Ultra Wash Dishwasher Model #665-16033403 wont

Resolved Question:

My Kenmore Ultra Wash Dishwasher Model #665-16033403 won't drain
Submitted: 7 years ago.
Category: Appliance
Expert:  Whrlp Master Tech replied 7 years ago.
when you press cancel ,can you hear the drain motor , even hear it HUMM?
Customer: replied 7 years ago.
Yes, I heard it hum
Expert:  Whrlp Master Tech replied 7 years ago.
ok if you take the drain hoes off the disposal or the drain under the sink ,can you blow back thru the hose ?
Customer: replied 7 years ago.
Yes I did that but got nothing...I drained the water from the bottom of the dishwasher already though. Not completely but down to the bottom
Expert:  Whrlp Master Tech replied 7 years ago.


One last question when in drain /cancel does the HUM last approx 2 min .then shuts off or does it only HUM for approx 1 min.?

Customer: replied 7 years ago.
Be right back, going to time it
Customer: replied 7 years ago.
Closed the dishwasher, hit the cancel button and it sounded like a shot of air came out of the sink. Humming started and lasted about 1-1/2 min or so...definitely more than 1 min but unless I was going slow didn't make it to 2 min
Customer: replied 7 years ago.
Do I need a tech to install this part or can I do it myself?
Expert:  Whrlp Master Tech replied 7 years ago.
it is better if the unit is un installed and laded on it`s back to change ,I would recommend a servicer do it unless you are a very handy person.