How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 80243
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

GE gas dryer DSXH43GV1WW Need to replace timer (WE04x10059).

Resolved Question:

GE gas dryer DSXH43GV1WW Need to replace timer (WE04x10059). What are the steps for proper removal/installation? Please & thanks.
Submitted: 7 years ago.
Category: Appliance
Expert:  Tyler Z. replied 7 years ago.
first, pull the knob straight out and off. Unplug the dryer. There are 2 clips between the top panel and the control panel. Use a flat head screw driver or putty knife and push on these hidden metal spring clips and this will allow the top panel to hinge up and backwards. Remove the 2 screws going through the front of the control panel into the timer and remove the timer from the back. Install the new timer and then move over wires from the old timer one at a time so that you can't confuse where they go. Then just put everything back together.
Tyler Z. and other Appliance Specialists are ready to help you