How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 81202
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

maytag mmv4205aab microwave stop/clear button doesnt work

Resolved Question:

maytag mmv4205aab microwave stop/clear button doesn't work
Submitted: 7 years ago.
Category: Appliance
Expert:  Tyler Z. replied 7 years ago.
If every other button works except the stop/clear button, you will want to replace the front touch panel. Here is a link to the part.

CLICK HERE

Customer: replied 7 years ago.

Is this something I will need a service technician to install or is it a do-it-yourself thing?

Expert:  Tyler Z. replied 7 years ago.
this part is probably a do it yourself thing. Just unplug the appliance, remove the screws holding on the top vent grille and that will expose the 2 screw at the top holding on the control panel. You can then disconnect the wires to the panel and change out the panels (move the control board over to the new panel) Make sure to right down all the connections so you don't mix them up when you reconnect them.
Tyler Z. and 3 other Appliance Specialists are ready to help you