How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bob L Your Appl Pal Your Own Question
Bob L Your  Appl Pal
Bob L Your Appl Pal, Home Appliance Tech
Category: Appliance
Satisfied Customers: 7548
Experience:  23 Years Major Appliance Repair
14958677
Type Your Appliance Question Here...
Bob L Your Appl Pal is online now
A new question is answered every 9 seconds

I have a GE Monogram Advantium oven and the tubular handle

Customer Question

I have a GE Monogram Advantium oven and the tubular handle is loose. Is there a way that I can tighten the handle?
Submitted: 7 years ago.
Category: Appliance
Expert:  Bob L Your Appl Pal replied 7 years ago.
You would need to remove the oven door to tighten the handle...If you can locate a model number ...I can give yo a better idea of what you are up against..
Customer: replied 7 years ago.
Advantium Built-In Oven ZSC2000 CWW
Expert:  Bob L Your Appl Pal replied 7 years ago.

This unit you will not have to remove the door...Remove #1804 first ...This will give you access to the handle screws #1803.....Bob

 

graphic

Customer: replied 7 years ago.
Removing 1804 does not give any access to the handle screws
Expert:  Bob L Your Appl Pal replied 7 years ago.

It will give you access to the mounting screws ..Which secure the front half of door...Includding the handle...You are going to have to break it down ..Just take note as to how each piece is installed....

Customer: replied 7 years ago.
The only screws under 1804 are coming from the opposite direction
Expert:  Bob L Your Appl Pal replied 7 years ago.
Then you have to remove screws #1815....Which are attached to the brackets #19.....Then remove the bootom rail at #20....