How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 10390
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

whirlpool wtw58esvw auto load sensing does not work

Customer Question

whirlpool wtw58esvw auto load sensing does not work
Submitted: 7 years ago.
Category: Appliance
Expert:  Whrlp Master Tech replied 7 years ago.
can you elaborate on load sensing not working?
Customer: replied 7 years ago.
auto load sensing guages amount of water in the tub small load small amount of water...but it fills to the top with all loads...opening the top would effect the filling so I did not open it but it still filled the tub full... no way to override this feature manually
Expert:  Whrlp Master Tech replied 7 years ago.

no way to over ride the feature ,but it should not fill all the way every timer.

I will recommend to replace the sensing switch ,and the flow meter

here are liks to both , Sensing switch is Item #38 flow meter is #20

ht tp://

both of these are the only component that deal with the water level in the washer.