How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tom Goellner Your Own Question
Tom Goellner
Tom Goellner, Home Appliance Technician
Category: Appliance
Satisfied Customers: 1627
Experience:  32 yrs. experience servicing major appliances and HVAC equipment.
Type Your Appliance Question Here...
Tom Goellner is online now
A new question is answered every 9 seconds

i have a GE electric range from ~1970 four burners, one 8

This answer was rated:

i have a GE electric range from ~1970
four burners, one 8 inch and three 6 inch
model number is XXXXX (which seems not to be in parts data bases )
serial number E120928
10.3 KW
Was probably purchased from Sears

i need to replace the burners. suggestions ??

thank you warren shufeldt
XXX-XXX-XXXX [email protected]
No GE model numbers start with the letter J. However if you can tell me this - do the burners simply push in to a receptacle or do they lift up and the wires are attached to the burners with screws and if they do attach with screws do the burners have a chrome trim ring around them or no chrome ring .
Customer: replied 7 years ago.
i don't know where you got the letter J in the model number. eg 315006AV

8 inch burner has a chrome trim ring 1/2 inch wide with a diameter of 9 3/8 inch

one screw attaches the burner assembly to the frame at the back of the burner

from the front of the burner

(left) white wire red wire black wire (righr)

wires incased in a glass (?) assembly held together by clips on both left and right sides
removing the clips show wires attached by screws as shown above
red and white wires each attach to one coil and both coils terminate at the
black wire
Sorry my answer was misleading - meant no the model you gave is not a GE number because they always start with a letter J...The burners you need are WB30X356 for the small burners and WB30X354 for the large burner and has them.
Tom Goellner and other Appliance Specialists are ready to help you