How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I need help my Maytag MAH4000AWW serial #403 will not turn

Customer Question

I need help my Maytag MAH4000AWW serial #403 will not turn off after it runs through a cycle. It washes the clothes just fine, it keeps doing the last two tumbles over and over and over. It won't shut off HELP!!!!
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
you need to check your main control board.
Machine control board. *Burned resistor on board indicates another problem within the machine.
Appliance Part Mouse OverAppliance Part Mouse Over
Mouse over to see other views. Everything you see is included in this part.
Part 775784
its located in the top control panel. check this for bad resistor, let me know thanks.Bryan
Customer: replied 7 years ago.

can I buy the control board and if so do you have part number and is it easy to change?

Expert:  Bryan replied 7 years ago.
its fairly easy to change , you just have to take the screws out along the top of control panel and tip it forward,the board will be on the back panel once you get it open. let me get the info for you, i'll be right back
Expert:  Bryan replied 7 years ago.
heres the diagram its part# XXXXX on this diagram, thanks Bryan,
Customer: replied 7 years ago.

one last question where do I get the part? online or I live in OHio should I be able to get it locally

Expert:  Bryan replied 7 years ago.
Bryan and 3 other Appliance Specialists are ready to help you
Customer: replied 7 years ago.
Bryan thank you for your help I'll let you know if this fixed the problem
Expert:  Bryan replied 7 years ago.
ok you may want to look at it and see if it has any burns on the board, but even if it doesnt this is the problem, thanks Bryan