How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have Kenmore Gas Range 75980.890. On the BROILER, why will

Customer Question

I have Kenmore Gas Range 75980.890. On the BROILER, why will the glow bar/ignitor and flame not turn off when the STOP button is pushed . I have to unplug the electronic control.
Submitted: 8 years ago.
Category: Appliance
Expert:  Bryan replied 8 years ago.
you have a stuck relay on the main control board (clock or erc) they call this an ecr electronic range control, Part 254220Part 254220I've run into this allot you need to change the ecr, heres a link, thanks Bryan
Customer: replied 8 years ago.
I will accept your answer and link to the part. I'm pretty sure I tapped on that thing when I opened some access to look inside yesterday.What is best way to access this part when replacing?
Expert:  Bryan replied 8 years ago.
through the back panel on the control head. pull the range out and take the top cover off, this is where the screws that hold the clock in are located. make sure you take one wire off at a time when replacing this . hope this helps, thanks. Bryan
Bryan and other Appliance Specialists are ready to help you
Customer: replied 8 years ago.
I'm gonna give it a try
Expert:  Bryan replied 8 years ago.
ok thanks if you need more help just ask, Bryan