How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Medic Your Own Question
Appliance Medic
Appliance Medic, Home Appliance Technician
Category: Appliance
Satisfied Customers: 10831
Experience:  Factory Trained CFC Technician
Type Your Appliance Question Here...
Appliance Medic is online now
A new question is answered every 9 seconds

My Whirlpool Quiet Partner II is stuck on blinking clean.

This answer was rated:

My Whirlpool Quiet Partner II is stuck on blinking clean. How do I get it to work?
Hello does it blink 7 times?
Customer: replied 8 years ago.
Yes it blinks 7 times. Stops for a couple of seconds and does it again.
Ok press normal heated dry normal heated dry normal until all the lights come once they do press cancel if the code comes back you will need to check the heater circuit.
Customer: replied 8 years ago.
Thank you it seems to be working now. Is this normal for this make? I still have 2 weeks until it is 1 yr old. Maybe I should contact whirlpool for a replacement.
Yes i would set up a call if the unit is under warranty.
Appliance Medic and other Appliance Specialists are ready to help you