How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bob L Your Appl Pal Your Own Question
Bob L Your  Appl Pal
Bob L Your Appl Pal, Home Appliance Tech
Category: Appliance
Satisfied Customers: 7548
Experience:  23 Years Major Appliance Repair
14958677
Type Your Appliance Question Here...
Bob L Your Appl Pal is online now
A new question is answered every 9 seconds

Purchased 2 new Whirlpool commercial washers mod# XXXXX

Resolved Question:

Purchased 2 new Whirlpool commercial washers mod# XXXXX serial #s CY0760161 & CY0960147. Both fill ok for wash cycle but only half full for rinse cycle. Wash time is 9 min. All else looks good. Is there an adjustment for just the rinse cycle level?
Submitted: 8 years ago.
Category: Appliance
Expert:  Bob L Your Appl Pal replied 8 years ago.

Check the incoming water supply.....If washer fills on warm setting and rinses on cold ....One of the lines may be clogged restricting flow into washer(glogged screen)...Check all hoses from main to rinse outlet.....

Customer: replied 8 years ago.
Is the rinse cycle level controled by time or water level pressure switch?
Expert:  Bob L Your Appl Pal replied 8 years ago.

Yes....If the machinse is filling slow then the machine will act as if there is something wrong with the timer advancing...When what is happening is the water is filling to slow...Due to a clog in the water line ...happens most when the screen is full of sediment...

Bob L Your Appl Pal and 3 other Appliance Specialists are ready to help you