How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 81105
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

I have a kitchen aid electric architect series ceramic top

Resolved Question:

I have a kitchen aid electric architect series ceramic top stove. One of the burnes is making a clicking sound and the light over the control dial clicks on and off with the sound. Burner works fine, not sure if it is the control dial or the burner element itself. It doesn't happen all of the time. Please help
Submitted: 8 years ago.
Category: Appliance
Expert:  Tyler Z. replied 8 years ago.
is is going to be a problem with your control switch known as your "infinite switch" The burner itself doesn't do anything but heat when it gets power or not heat when it doesn't get power. If it's still heating then your burner is deffinately still good.
Tyler Z. and other Appliance Specialists are ready to help you