How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 81939
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

recently my fisher and pykell pot draw dishwasher got moisture

Resolved Question:

recently my fisher and pykell pot draw dishwasher got moisture on incoming power card repaced the card due to burning out still couldnt get unit to work so ireplaced the mother brd but still no joy could i get your opinion thanks.
Submitted: 8 years ago.
Category: Appliance
Expert:  Tyler Z. replied 8 years ago.
if you get no power still then it sounds like either your wire harness is broken or youe heater plate is shorted. The heater plate is located in the bottom of each drawer and when it shorts you will see a solder link on the back of the plate that has seperated. YOu can't get a view of this without taking the entire drawer apart and actually taking out the round heater plate.
Customer: replied 8 years ago.
sorry havnt had time to look at till now working shift work ,have hadthe heater plate replaced but when it shorted last time th unit still had power to the lcd panel and the touch pad .will check the wire harness and let you know thanks jp.
Expert:  Tyler Z. replied 8 years ago.
if the heater plate is shorted you will not have power to the LCD panel OR touchpad. If you did before then someone replaced the wrong part. This time it sounds like your heater plate.
Tyler Z. and 3 other Appliance Specialists are ready to help you