How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have aG.E. model WBVH6240 front load washer. just move yesterday.

This answer was rated:

I have aG.E. model WBVH6240 front load washer. just move yesterday. Now when the spin cycles goes the washer moves and shakes really bad. The washer in level also. is there something that came undone when moved?
did you use shipping bolts when you moved this? shown here. Part(NNN) NNN-NNNN width=let me know thanks Bryan
if you didnt you may have broken or had a shock that has a problem. Part(NNN) NNN-NNNN width=check these. thanks Bryan
Customer: replied 8 years ago.

No I did not have the bolts in there. How can I find out if one of the shocks are bad?

Pete

you need to pull the small back panel off and check to see if one has fallen off or is broken.there are screws holding this.
Bryan and 4 other Appliance Specialists are ready to help you