How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chas Your Own Question
Chas, Home Appliance Technician
Category: Appliance
Satisfied Customers: 16453
Experience:  Maytag, Whirlpool, GE & Kenmore Factory Trained Service Tech
Type Your Appliance Question Here...
Chas is online now
A new question is answered every 9 seconds

i have a profile and the control settings the lights are off,

Resolved Question:

i have a profile and the control settings the lights are off, the two light bubs behind the pnl. are lit. the ref. is still working could you help
Submitted: 8 years ago.
Category: Appliance
Expert:  Chas replied 8 years ago.
Can I get the model number please?
Customer: replied 8 years ago.
Expert:  Chas replied 8 years ago.
Is there anything showing in the display? even dashes?
Customer: replied 8 years ago.
Expert:  Chas replied 8 years ago.

you are going to need to replace the power board in the freshfood section, this is part number WR55X10522, and can be ordered at or But try one thing before replacing the unit, unplug the complete fridge for 5 minutes then plug it in to see if it resets,,,


Part(NNN) NNN-NNNN width=

Chas and other Appliance Specialists are ready to help you
Customer: replied 8 years ago.
i cant find that model# XXXXX those sites you told me about,i checked again the # XXXXX XXXXX i unplugedlike you said they came on, when i tried to change settings they went back off. this is a side by side with bottom freezer, the control pnl. is on top. ge-f228jbaa 5der0353-54683 should i try these numbers
Expert:  Chas replied 8 years ago.
Just use the part number I sent you....WR55X10522 for it...GE is looked up different than a lot of models, the model look up that is used for this model should be PFS22MISBBB to look it up...