How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Medic Your Own Question
Appliance Medic
Appliance Medic, Home Appliance Technician
Category: Appliance
Satisfied Customers: 10831
Experience:  Factory Trained CFC Technician
13570846
Type Your Appliance Question Here...
Appliance Medic is online now
A new question is answered every 9 seconds

I have a GE Potscrubber 900 model GSD900G-01. The door cable

Resolved Question:

I have a GE Potscrubber 900 model GSD900G-01.   The door cable appears to have broken.   Where do I get parts and how difficult is this to fix? How do I fix and can I do it myself?   Thank you.   Elaine
Submitted: 8 years ago.
Category: Appliance
Expert:  Appliance Medic replied 8 years ago.

Hello remove the kick plate four 1/4 inch screws then take the spring and hook the cables to them and set the sring back into place here is a link were you can get the part.

http://www.partselect.com/PartDetail.aspx?Inventory=263918&SourceCode=1

 

Customer: replied 8 years ago.

Can you complete the repait by just removing the front kick plate?

 

Doe the cable go all the way to the back?

Expert:  Appliance Medic replied 8 years ago.
Yes you can fix it by just removing the kick plate. The cables hook to a spring that hooks to the back leg there is a hole were the end of the spring hooks. Pretty simple job first time will take around half hour to complete.
Appliance Medic and other Appliance Specialists are ready to help you