How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Medic Your Own Question
Appliance Medic
Appliance Medic, Home Appliance Technician
Category: Appliance
Satisfied Customers: 10831
Experience:  Factory Trained CFC Technician
Type Your Appliance Question Here...
Appliance Medic is online now
A new question is answered every 9 seconds

I have a Kenmore top-loading washer model 110.92580100, or

Resolved Question:

I have a Kenmore top-loading washer model 110.92580100, or 25801 series. The washer 'bangs' in the spin cycle so I assume a spring broke. When I moved the washer I found an entire spring intact lying on the floor. I would like to attempt to re-attach it but I need to know how to gain access to the inside of the washer. Can you provide a schematic or just plain ole' directions on how to do this?
Submitted: 8 years ago.
Category: Appliance
Expert:  Appliance Medic replied 8 years ago.

Here is a link that shows how all top load washers come apart!


Appliance Medic and other Appliance Specialists are ready to help you