How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 80326
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

I have a Maytag gas range CRG9700AAL. On the display it shows

Resolved Question:

I have a Maytag gas range CRG9700AAL. On the display it shows f-1 and beeps none stop.I had to unplug.
Submitted: 8 years ago.
Category: Appliance
Expert:  Tyler Z. replied 8 years ago.
F1 means that your temperature probe inside your oven cavity has failed--- you can test it by removing the 2 screws that hold it onto the back wall and checking resistance--- the resistance should be 1080 Ohms at room temperature. If it checks good then your control board is shorted and reading improperly and will have to be replaced.

90% of the time it's the sensor--- and generally happens after a self cleaning but not always.

Here is the part you will need.


Tyler Z. and 3 other Appliance Specialists are ready to help you