How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

My Kenmore washing machine will go through all the cycles but

Customer Question

My Kenmore washing machine will go through all the cycles but when it gets to the spin cycle it stops just before it drains and spins. Do you think it is the pump?
Submitted: 8 years ago.
Category: Appliance
Expert:  Bryan replied 8 years ago.
you most likely have a broXXXXX XXXXXd switch. these are plastic and break easy. look on your lid and if you have a post that goes through the top of machine this is what hits the switch. you should see 2 screws going in from the side where the lid closes, this is probably where its broken. if you give me model # XXXXX'll look up new switch for you , thanks Bryan
Bryan and 3 other Appliance Specialists are ready to help you
Customer: replied 8 years ago.
I need to go home and get it for you. Is it easy to replace myself?

Expert:  Bryan replied 8 years ago.
not bad to change. let me know model and i'll tell you how to do it. thanks Bryan