How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

how do you change out the dishwasher hinge pulley on a SHU

Customer Question

how do you change out the dishwasher hinge pulley on a SHU66C05UC
Submitted: 8 years ago.
Category: Appliance
Expert:  Bryan replied 8 years ago.
let me see if i can find your mode, thanks Bryan
Bryan and other Appliance Specialists are ready to help you
Customer: replied 8 years ago.

I accepted. Now what is the answer to my questions other than let me see if i can find you mode.

 

Art.

Expert:  Bryan replied 8 years ago.
well i found the diagram but it doesn't show how it goes together, but i believe you have to take the side of because this unit is enclosed. is the pulley thats in yours now broken or is the cable broken ? here is the diagram of the assembly,click here. http://www.searspartsdirect.com/partsdirect/displaySubComponentFullSize.action?imageUrl=http%3a%2f%2fcontent.searspartsdirect.com%2flis_png%2fPLDM%2fP0308127-00005.png it shows the way it in and the cable raps around two pulleys. the best way to install this is to take machine sides off and look at the one thats not broken and install the same way. you cant just put this one in from front it looks like its enclosed behind side cover., is there a bottom kick plate on this? I found a different diagram that shows different hinge spring setup look at this diagram , http://www.pcappliancerepair.com/model-frame-diagram.php?pr=1 tell me which one looks like yours, I'm sorry it took so long to get back to you I was tied up one an emergency ref. call and just got back here around 6:30pm ,thanks Bryan