How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a Kenmore 30 self cleaning electric drip in range.

Resolved Question:

I have a Kenmore 30" self cleaning electric drip in range. When preheating the oven a "F5" code comes on the screen. The model number is XXXXX Is this repairable?
Submitted: 8 years ago.
Category: Appliance
Expert:  Bryan replied 8 years ago.
F1 Analog to Digital Failure Disconnect for 30 seconds - if display re-appears - replace control
F1 Safety flip flopReplace component
F1Shorted keypad Replace component
F3Oven temperature sensor openedMeasure oven temperature sensor resistance, should be1100 ohms. If not, replace sensor
F2Oven temperature sensor shorted Replace oven temperature sensor
F3Oven too hotReplace oven temperature sensor
F3Clean temp too hotReplace oven temperature sensor
F5 Check door/latch switch Replace component
these are the fault codes for your oven your oven is made by roper kenmore realy doesnt make anything they sub it out to lowest bidder,911. means made by roper hope this helps thanks Bryan
Bryan and 2 other Appliance Specialists are ready to help you