How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

amana modle # XXXXX compressor runs all the time. no ...

Customer Question

amana modle # XXXXX compressor runs all the time. no ice is made water from dispense in door not cold. freezer temp about 20 refrigerator side about 42. initally water was leaking from freezer door that has stopped. i have cleaned coils but did not help
Submitted: 8 years ago.
Category: Appliance
Expert:  Bryan replied 8 years ago.
please check back wall of frezzer section real good for frost on panel. also make sure fan inside freezer is running and theres one in the back by compressor also make sure thats runnig ,let me know Bryan
Bryan and 3 other Appliance Specialists are ready to help you
Customer: replied 8 years ago.
little ice on sensor on top of evap forced into defrost element heated up all fans are running

why no ice?
Expert:  Bryan replied 8 years ago.
is there only a liitle ice on coils?maybe only one corner near top of coils is that what your seeing? you took back panel off freezer to look right? if you did and only saw a liitle frost on coils at top and none anywhere else then you either have a freon leak or sealed system problem either one would have to be done by repairman. let me know Bryan
Customer: replied 8 years ago.
disregard my question regarding amana at this time
Expert:  Bryan replied 8 years ago.
ok you can come back and ask more if you need to I'm glad to help, thanks Bryan