How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

How do I raise the top of my Neptune washer to replace the ...

This answer was rated:

How do I raise the top of my Neptune washer to replace the dispenser unit?

most of the neptunes you have to take the scews out of the door and lift door up a bit and it will come off. then take screws out of other side across from door screws . then you can remove front cover from machine by leaning cover forward then lift off botton clips . once thats done you will see two 5/16 screws near the top remove them . after you take four screws out of dispenser on top of machine you can lift top up. make sure you unplug machine first. hope this helps Bryan

Bryan and 3 other Appliance Specialists are ready to help you