How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chuck G. Your Own Question
Chuck G.
Chuck G., Home Appliance Technician
Category: Appliance
Satisfied Customers: 343
Experience:  30 Yrs. Experience in the appliance repair field
Type Your Appliance Question Here...
Chuck G. is online now
A new question is answered every 9 seconds

Hello, I replaced a Whirlpool Dryer timer (part # XXXXX) ...

Customer Question

Hello, I replaced a Whirlpool Dryer timer (part # XXXXX) but only have one available terminal left over for the in-line resistor. The old timer had the RS1 & RS terminals, but the new timer only has an RS1. Can''t figure it out.
Submitted: 9 years ago.
Category: Appliance
Expert:  Glenn replied 9 years ago.

I would jump the 2 terminals
Customer: replied 9 years ago.
What two terminals? There's only one available.
Expert:  Chuck G. replied 9 years ago.
Can you take a digital picture of the old and new timer and post it for me to see? Also please give me your model # XXXXX Thank you! chuck