How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chuck G. Your Own Question
Chuck G.
Chuck G., Home Appliance Technician
Category: Appliance
Satisfied Customers: 343
Experience:  30 Yrs. Experience in the appliance repair field
Type Your Appliance Question Here...
Chuck G. is online now
A new question is answered every 9 seconds

my fridgedaire stove gives codes of f2 f3 and f5 and beeps ...

Resolved Question:

my fridgedaire stove gives codes of f2 f3 and f5 and beeps all the time what is the problem. thanks
Submitted: 9 years ago.
Category: Appliance
Expert:  Chuck G. replied 9 years ago.
Hi, Thank you for using justanswer for your appliance questions!
I need a little more info from you, so I can advise you better!
Please reply back with your model #

Chuck G.
Customer: replied 9 years ago.
Reply to Chuck G.'s Post: hello i am not at the stove right now but it has metal covers over the burners so it is easy to clean . it has a self cleaning oven. sorry. jesse
Expert:  Chuck G. replied 9 years ago.

here is the fault codes for a frigidaire, It sounds like the clock control has failed. The first thing you need to do is Unplug the range for at least 5 minutes. This will reboot the clock. Repower up and check to see if this cures the problem. If it not , replace the clock assm Hope this helps!!

Let me know if you need more assistance or if you have any questions.
Thank you for using

Chuck G.
Please " ACCEPT " when your question has been completely answered so I may be compensated.
Positive Feedback is very important, That is how we get rated! Bonuses are appreciated!


Display Condition Repair
F0 & F1 EOC failure Replace EOC
F2 Oven too hot Defective Sensor or EOC (Electronic Oven Control)
F3 Oven Sensor Open Replace Oven Sensor
F4 Oven Sensor Shorted Replace Oven Sensor
F5,6,7 EOC failure Replace EOC
F8 Lock Switches Check or Replace
F9 Control has detected a problem with the motor door latch assembly Check wiring, replace the motor door latch assembly is necessary
Chuck G. and 2 other Appliance Specialists are ready to help you