How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chuck G. Your Own Question
Chuck G.
Chuck G., Home Appliance Technician
Category: Appliance
Satisfied Customers: 343
Experience:  30 Yrs. Experience in the appliance repair field
8049636
Type Your Appliance Question Here...
Chuck G. is online now
A new question is answered every 9 seconds

I have a GE Profile Spectra XL44 gas oven and rage. The ...

Customer Question

I have a GE Profile Spectra XL44 gas oven and rage. The range works fine but the oven will not heat to a temperature over 100 degrees F. What do I need to do?
Submitted: 9 years ago.
Category: Appliance
Expert:  Chuck G. replied 9 years ago.
Hi, Thank you for using justanswer for your appliance questions!

First we need to see if your ignitor is heating up. Turn your oven on and see if you see a glow.
Chuck G. and 2 other Appliance Specialists are ready to help you
Customer: replied 9 years ago.
Reply to Chuck G.'s Post: I do not see a glow
Customer: replied 9 years ago.
No glow appears. It seems like my wife was mistaken about the oven actually heating up. The digital display does show 100 degrees after you push the enter button.
Expert:  Chuck G. replied 9 years ago.
Most likely your igniter is bad. It is located under the bottom oven liner, the part below the racks.
The part # XXXXX need is WB02X9154 readily available at your local appliance dealer. Approx cost about 65.00.Be SURE TO UNPLUG your range before servicing!

Hope this helps!

Let me know if you need more assistance or if you have any questions.
Thank you for using justanswer.com

Chuck G.

__________________
Please "ACCEPT" when your question has been completely answered so I may be compensated.
PLEASE LEAVE FEEDBACK!
Positive Feedback is very important. Bonuses are appreciated!
Customer: replied 9 years ago.
The broiler ignites.
Expert:  Chuck G. replied 9 years ago.
Yes! it has a different ignitor. Here is a break down of your part. You need # XXXXX

graphic
Customer: replied 9 years ago.
Do I remove the ignitor and metal casing, or just the ignitor itself? How do I disconnect the two wires?
Expert:  Chuck G. replied 9 years ago.
The new ignitor should have some instructions. The ignitor should have a disconnect (green in color) on one wire, the other wire should have a terminal on it. I would remove the manifold #26 on the diagram, for ease of ignitor replacement.