Agriculture and Farm Equipment
Agriculture and farm Equipment repair questions? Ask a mechanic.
Connect one-on-one with {0} who will answer your question
Answered in 1 hour by:
7/8/2019
Dan, Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 15,593
Experience: 17+ yrs. shop and field experience with all major brands of heavy equipment, trucks and farm equipment - 1995 WyoTech graduate.
VerifiedHi, My name is***** will be glad to help. We can follow up as needed on here, Give me some time to review your information and follow up with my responses. Professionals are not employees of the site but users of the site and help on here as time allows in between jobs, family, etc. Response time can vary depending on my work load each day but I will always respond back on my next available login. Feel free to respond back at anytime if for any reason we seem to get separated, for status, etc.
If your hydraulic oil is full, you will want to check inside your hydraulic oil filter for any signs of fine metal that looks like glitter in the oil and filter that would flag a potential hydraulic component or pump failure as well as contamination within the hydraulic system from that failure. If clean, you will want to have your pressures check confirmed whether or not they are within factory specifications. Remove the relief valve cartridges in the main control valve to inspect for any debris or damage as well as damaged O-rings that could cause them to malfunction and bypass pressure. Check your control valve spools as well for any scoring or damage that could cause them not to function properly. It is a pleasure to help anyway I can.
Dan, Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 15,593
Experience: 17+ yrs. shop and field experience with all major brands of heavy equipment, trucks and farm equipment - 1995 WyoTech graduate.
VerifiedDan and 87 other Agriculture and Farm Equipment Specialists are ready to help you
How JustAnswer works
Describe your issueThe assistant will guide you
Chat 1:1 with a mechanicLicensed Experts are available 24/7
100% satisfaction guaranteeGet all the answers you need
Related Agriculture and Farm Equipment Questions
4310 Deere with back and front loader. Squirrels chewed up
4310 John Deere with back hoe and front loader. Squirrels chewed up wiring. Approx cost to rewrite Yoh like to sell as but wondered what it would cost to reeire … read more
Curtis B.
Technician
Associate Degree
7,255 satisfied customers
Same issue that I'm reading here. 1975 oliver 1465 3 point
Same issue that I'm reading here. 1975 oliver 1465 3 point will not raise. Juat replaced hydro pump, all filters, gaskets etc. Front loader works fast and flawlessly. All fluids are new and at proper … read more
Curtis B.
Technician
Associate Degree
7,255 satisfied customers
Three point hitch will not raise had a front loader on it
Second opinion] three point hitch will not raise had a front loader on it its a kobata m5700 … read more
Curtis B.
Technician
Associate Degree
7,255 satisfied customers
I have a M4030SU that I added a DEER Loader to a few years
I have a M4030SU that I added a DEER Loader to a few years back everything worked fine but just the other day the Bucket is inoperable (no Curl or Lift). The Loader it self is fine just the Bucket. I … read more
Chris (aka-Moose)
Technician
363 satisfied customers
On b7100 manual trans the backhoe cam loose. How do I re
on b7100 manual trans the backhoe cam loose. How do I re hook it up? I just got it. using the front loader when it came off. any help appreciated. … read more
Curtis B.
Technician
Associate Degree
7,255 satisfied customers
I have a steering problem with 310D deer back, just stop
I have a steering problem with 310D john deer back hoe, just stop steering on day, it in the column. steering will just turn lock to lock. … read more
Dan
Technician
Associate Degree
15,593 satisfied customers
I have a 1979 dear back and the loader doesnt want to lift
Second opinion] i have a 1979 john dear back hoe and the loader doesnt want to lift very fast and kinda jerks when it does … read more
Wayne
Journeyman
Vocational, Technical or Trade Scho
2,661 satisfied customers
I have a 410 G deer backhoe and when it gets warm the brakes
I have a 410 G John deer backhoe and when it gets warm the brakes lock up … read more
Keiphun Sowell
Owner Brothers Restoration/Troubleshoot
AutoDiesel Technology
3,289 satisfied customers
I recently bought an old ford tractor (a 1987 vintage 2110)
I recently bought an old ford tractor (a 1987 vintage 2110) it came with a 776B loader and I caan't get the loader hydraulics to work. Clearly , I don't understand the system but need to know if is bu… read more
Dan
Technician
Associate Degree
15,593 satisfied customers
I have a -2150D52323 Back the Three point hitch is very slow
I have a B-2150D52323 Back Hoe the Three point hitch is very slow the front in loader just will go up how do I check pump pressure it is full of fluid … read more
Curtis B.
Technician
Associate Degree
7,255 satisfied customers
We purchase a Kubota m59 tlb from a city 800 miles away,
Hello, We purchase a Kubota m59 tlb from a city 800 miles away, none of the hydraulics work (trans/hoe/loader). … read more
Curtis B.
Technician
Associate Degree
7,255 satisfied customers
1988 deer 410 back. Water in oil, head gasket good? It is a
1988 john deer 410 back hoe. Water in oil , head gasket good? … read more
Curtis B.
Technician
Associate Degree
7,255 satisfied customers
Second opinion] I have a Mitsubishi MT1601D ,I put a front
Second opinion] I have a Mitsubishi MT1601D ,I put a front loader on it ,disconnected Just Matic Control and hooked the line to it for front end loader , it has very little power to lift it does it bu… read more
Curtis B.
Technician
Associate Degree
7,255 satisfied customers
Just purchased a 2012 DK55 with loader and backhoe. three
just purchased a 2012 DK55 with loader and backhoe. three point lift arms are in the down position (just a few inches off the ground) Looks as if the lift arms would need to be up in order to remove t… read more
Curtis B.
Technician
Associate Degree
7,255 satisfied customers
Massey 375 lift arms on 3 poibt hitch not lifting. 375 2wd
yes made sure has oli and all levers were in correct position, quit sudenly … read more
Curtis B.
Technician
Associate Degree
7,255 satisfied customers
I have a Kubota M59 backhoe front loader. I have a set of
I have a Kubota M59 backhoe front loader. I have a set of forks that takes the place of the loader bucket when I need to lift a pallet. My owner's manual says the loader can lift approx. 3000 LBS. My … read more
Chris (aka-Moose)
Technician
363 satisfied customers
I just recentley changed the hydraulic pressure line on my
I just recentley changed the hydraulic pressure line on my Ford 2000 3 cyl diesel. my hydraulics are working fine after bleeding,but,it does not lift loads more than half way. I need to run the rpm's … read more
Curtis B.
Technician
Associate Degree
7,255 satisfied customers
i have a 4219 dt-07 john deere engine how do you set injection
i have a 4219 dt-07 john deere engine how do you set injection pump timming and what is the specification for pump timming… read more
spankyjr1
Retired
Vocational, Technical or Trade Scho
420 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
JustAnswer in the News:
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
What Customers are Saying:
Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.
Freshfield, Liverpool, UK
This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!
Los Angeles, CA
Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.
Hesperia, CA
I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.
Kernersville, NC
Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.
Woodstock, NY
Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.
Elkton, Maryland
He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.
Dallas, TX
< Previous | Next >
Meet the Experts:
Curtis B.
Technician
7,255 satisfied customers
Technican turned service manager on multiple lines of equipment and rental equipment.
Wayne
Journeyman
2,661 satisfied customers
34 + years as a mechanic
Chris (aka-Moose)
Technician
363 satisfied customers
24 years of experience diagnosing & repairing
cumminsdr
Mechanic
44 satisfied customers
Cummins field tech
dieseldan55
Mechanic
42 satisfied customers
Road mechanic for Volvo Construction Equipment.
Cat Man
Cat Engine Expert
37 satisfied customers
I am ASE Master Certified.
MowerDocMD
Technician
33 satisfied customers
Own LaGrange Small Engine Repairing farm tractors and equipment
< Previous | Next >
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
