My tc 33d locked up yesterday it would move forward or backwards about two feet after several times it started to move

Hi sorry for the delay. That sounds like a potential hydraulic pump for a hydrostatic drive problem. the first thing you want to do is inspect inside the filter for fine metal or debris that would confirm a component or pump failure occurring. if I do not run it anymore than you have to as it'll just contaminate the system further and create more damage. Also the system would have to be completely cleaned out and flushed before a new component can be run otherwise the new component will fail. By chance if it is clean when you look inside the filter and everything looks good you will want to have somebody check the pressures would test gauges and also check the flow with a flow meter. another thing to check is a potential engine to pump Drive coupling between the engine in the pumps for slippage or damage.. reply back with the results and if we need to dig deeper into this as we can follow up as needed on here. Please take a moment to rate my answers as that is how the site credits my time helping on the site. Five-star ratings and bonuses are always greatly appreciated.