How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 28889
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

The seat sensor seems to be defective or needs

Customer Question

The seat sensor seems to be defective or needs cleaning...mowed fine one minute, turned it off to rest, then wo uldn 't crank. The seat came completely off
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: Just since yesterday
JA: Do you plan on doing the work yourself?
Customer: If possible
JA: Anything else we should know to help you best?
Customer: Battery is fully charged ... sensor under seat seems really dirty...button sensor seems fully depressed
JA: Just to clarify, what's the make and model of the appliance? And has it done this before?
Customer: YZ145332BVE or YZ145382BVE
Submitted: 1 month ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 1 month ago.

Hi,let's see if we can work together to get to the root of your problem! will try my best to help!

Expert:  Curtis B. replied 1 month ago.

Seat switch is a four wire switch, if broken, needs to be replaced, with the four wires, it can not be jumped out. See schematic in link below.

Expert:  Curtis B. replied 1 month ago.

It has two functions, one for start, and the other completes the run circuit.

Expert:  Curtis B. replied 27 days ago.

I see question is still open, did you see my response?

Customer: replied 26 days ago.
Hi Curtis... i ended up having to take the mower to the shop. I thank you for your response, but am not mechanic enough to fix it, even with your help. I appreciate your assistance, but find i needed to let professionals repair it. Thank you!