How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dd85 Your Own Question
dd85, Foreman
Category: Agriculture and Farm Equipment
Satisfied Customers: 524
Experience:  Service manger for over 18 years in same Dealership
Type Your Agriculture and Farm Equipment Question Here...
dd85 is online now
A new question is answered every 9 seconds

I have a new Holland 530 round has dual tying. with

Customer Question

hello sir, I have a new Holland 530 round has dual tying. with 540 PTO tractor at 1800 RPM, how fast should I extend and retract tier to make bale look professional?
JA: What is the complete model and serial number of your machine?
Customer: Not's 30 miles away in the field.I'm thinking 530 New Hollandround baler
JA: Anything else you want the equipment mechanic to know before I connect you?
Customer: thx yes. the baler chokes up sometimes when trying to pick up hay.
Submitted: 3 months ago.
Category: Agriculture and Farm Equipment
Expert:  dd85 replied 3 months ago.

For the choking problem slow down a little and make sure you are running 540 PTO speed. You may also try weaving into the windrow, this way the stiff hay will roll into the bale form.

Wrapping, be sure and run at 540 PTO speed, do not throttle down.

Arms will drop to the middle, count to 5 the move arms, count to 5 again, and keep moving and counting to 5.

Then look at the bale and see if there is enough or to much in the wraps.

The hardest problem is getting the spacing between the wraps, This will take practice may move just flip switch?> hold for 1/2 second.

Customer: replied 3 months ago.
I'm sorry I received a message that my $5 was refunded.I never receive an answer until today Sunday.appreciate the info but I must buy a new baler. Thx
Expert:  dd85 replied 3 months ago.

Sorry about the delay,

God luck on the new baler purchase.

The 530 is a good little baler.

Please remember to Rate my answer.